Operating Instructions
Page 32/60
Login
(View -> Login)
This icon takes you to the user
logon screen.
Chain type
Displays the chain type.
Position
Displays the selected position
description.
Wear diagramm
Wear diagramm of the chain
Chain extension
Visualisation of the chain
length in %.
Via the menu item "Info" you get information about the status of the software and about the device!
Symbol
Meaning
NOTE
The CCM-S has an internal memory located on the electronics inside the case. The elongation
values and operating times are stored there.
The elongation values are stored every 6 minutes - the values shown on the scale in the software are
float values stored in another "side" memory.
If the CCM-S is in the chain drive, it does not matter whether the laptop is connected or not - the
measured data are permanently stored in the CCM.
With respect to the x-y diagram shown in the software, the operating hours are copied from the
internal memory to the diagram when a length increment of 0.1% is exceeded.
Thus the maximum standard number of stored and displayed values in the diagram is 30 (resulting in
a maximum elongation of 30x0.1% = 3%).
