IWAKI PUMPS EHN-R, Инструкция по эксплуатации

Страница: 58 / 92

58 Operation programming
STOP function
The start/stop of the pump operation can be controlled by the external stop
signal.
• Operation stop at the stop signal input: "M-OF"
The pump stops while receiving the stop signal.
• Operation starts at the stop signal input: "M-ON"
The pump runs while receiving the stop signal.
■
STOP function programming
Enter manual mode.
Push the start/stop key to return to manual mode if the pump is in EXT
mode.
Push the UP key while pressing the start/stop key to call up the
anti-chattering programming screen.
"T-5" (default setting), "T-10" or "T-50" appears on the screen.
ON
STROKE RATE
ON
STROKE RATE
ON
STROKE RATE
ON
STROKE RATE
1
2