IWAKI PUMPS EHN-R, Инструкция по эксплуатации

Страница: 14 / 92

14 Introduction
Multiplier programming (See page 50)
1-999 shots can be allocated to one pulse signal.
*In the EXT operation, the pump runs at the manual operation spm.
*The pump runs in 1:1 operation when the multiplier is programmed to 1.
Example) When the multiplier is programmed to 5, the pump makes fi ve
shots per signal.
A storage function works when the pump receives the external signal before
the programmed shots per signal is completed.
*The storage function stores up to 255 pulses.
Divider programming (See page 52)
1-999 pulse signals can be allocated to make one shot.
* The pump can not run over 360spm even if the external signal is entered to run the
pump beyond the maximum spm.
*The pump runs in 1:1 operation when the divider is programmed to 1.
Example) When the divider is programmed to 5, The pump makes one shot
per 5-signal.
1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 1 2 3
Pulse signal input
Pump operation
1 2 3 4 5 1 2 3 4 5
Pulse signal input
Pump operation
Pulse signal input
Pump operation
1 2 3 4 5 1 2 3 4 5 1 2 3 4 5