IWAKI PUMPS EHN-R, Инструкция по эксплуатации

Страница: 46 / 92

46 Operation programming
Manual operation
Turn on power.
The LED lights and a display related to the cur-
rent mode appears on the screen.
* The pump enters the wait state in the manual mode
when turning on power with a default setting. The
pump calls up the last screen at a shutoff if it was
not in a default setting.
Enter manual mode.
Move to the next step when spm (1-360) is shown on the screen.
When "EXT" or ".0"-".360" is on the screen
Push the start/stop key once to enter the wait state in manual mode.
When "STOP" or "-STOP" is on the screen
See "STOP function cancellation" on page 60 and release the function.
ON
STROKE RATE
ON
STROKE RATE
ON
STROKE RATE
2
1