Ivoclar digital PrograMill Base, Руководство по эксплуатации

Страница: 77 / 144

Operating the Operating Panel
77
Tool has not yet been identified.
It is required for one of the upcoming
milling jobs and is assigned to this
job. • “Device Messages and Trouble-
shooting”, page 116
• “Manually registering a non-
identified tool”, page 123
Tool is inserted and correctly
identified.
The corresponding milling job is
ready for processing. • “Starting individual milling jobs
(Single mode)”, page 107
• “Starting several milling jobs (Multi
mode)”, page 108
Identification of the tool failed: The
Data Matrix Code on the shaft could
not be read (unauthorized or
damaged tool / unreadable code).
In such a case, you can manually
register the tool using the app. • “Device Messages and Trouble-
shooting”, page 116
• “Removing unnecessary, worn or
defective tools”, page 95
• “Manually registering a non-
identified tool”, page 123
Worn tool
Tool is in the spindle in the milling
chamber. “Removing unnecessary, worn or
defective tools”, page 95
Worn tool
The tool is again in the material and
tool changer.
Job failed.
Tool is in the spindle in the milling
chamber.
Job failed.
The tool is again in the material and
tool changer.
Milling job is being processed, tool is
being used. • “Starting individual milling jobs
(Single mode)”, page 107
• “Starting several milling jobs (Multi
mode)”, page 108
ESD pin spindle for One is in the
material and tool changer. “Inserting tools for calibration”,
page 45
ESD pin spindle for One is in the
material and tool changer.
Calibration is conducted.
Cleaning tool is in the material and
tool changer. “Performing the automatic cleaning
procedure”, page 127
Cleaning tool is in the material and
tool changer.
Automatic cleaning is conducted.
Element Description Reference