Ivoclar digital PrograMill Base, Руководство по эксплуатации

Страница: 102 / 144

Editing Milling Jobs
102
The hexagon on the block shaft can only be correctly inserted in the block holder in one
direction (installation safety).
The correct alignment of the block in the block holder is shown on the block holder (alignment
by means of the illustration and the Data Matrix Code on the shaft of the block). Make sure
that the shaft phases are aligned in the way shown in the picture.
If the block cannot be inserted easily, the installation direction may be incorrect. Rotate the
block (as illustrated with the metal shaft down) until it fits easily into the block holder.
CAUTION! Block inserted the wrong way around
Damage to the device.
Damaged block.

Insert the block into the block holder according to the instructions.

Do not insert with force.
2. Insert the block as shown (1) with the
shaft pointing downwards into the
block holder so that it clicks into place in
the block holder.
Make that the shaft (3) is correctly aligned.
On the block holder there is an arrow (2) to
show the correct direction of insertion for
the block holder in the loading aid.
3
1
2