Ivoclar digital PrograMill Base, Руководство по эксплуатации

Страница: 74 / 144

Operating the Operating Panel
74
Block is inserted and correctly
identified. It is required for one of
the upcoming milling jobs and is
assigned to this job. “Preparing milling jobs”, page 89
Bock has not yet been identified.
It is required for one of the upcoming
milling jobs and is assigned to this
job. • “Device Messages and Trouble-
shooting”, page 116
• “Manually registering a non-
identified block”, page 121
Block is currently in the milling
chamber for identification.
Identification is running. • “Starting individual milling jobs
(Single mode)”, page 107
• “Starting several milling jobs (Multi
mode)”, page 108
• “Device Messages and Trouble-
shooting”, page 116
• “Manually registering a non-
identified block”, page 121
Block is inserted and correctly
identified. The corresponding milling
job is ready for processing. • “Starting individual milling jobs
(Single mode)”, page 107
• “Starting several milling jobs (Multi
mode)”, page 108
Block is currently in the milling
chamber for identification.
Identification of the block failed: The
Data Matrix Code on the shaft could
not be read (unauthorized or
damaged block / unreadable code).
In such a case, you can manually
register the block using the app. • “Device Messages and Trouble-
shooting”, page 116
• “Manually registering a non-
identified block”, page 121
The block is again in the material and
tool changer.
Identification of the block failed: The
Data Matrix Code on the shaft could
not be read (unauthorized or
damaged block / unreadable code).
In such a case, you can manually
register the blog using the app.
Milling job active: Block is being
processed. • “Starting individual milling jobs
(Single mode)”, page 107
• “Starting several milling jobs (Multi
mode)”, page 108
Element Description Reference