ITW GSE 4400, Руководство пользователя

Страница: 37 / 213

OM-2245 / Operation and Maintenance Manual
ITW GSE 4400 / 400 Hz. Generator Set
March 15, 2015
Chapter 1-2
Page 6
c) Long-Term Storage (Over 30 Days)
To protect the generator and other electrical components, the complete unit should be packaged
using moisture proof packaging material and sealing material. Place containers of moisture-
absorbing chemicals in the unit before packaging.
The unit may be stored for long periods without the above preparation, if it is possible to operate the
engine once each week. When starting once a week, proceed as follows:
(1) Make certain the cooling system is adequately protected.
WARNING
ENSURE adequate ventilation before starting the engine.
(2) Start the engine and operate under full load (using a resistive load bank or aircraft) until the
coolant temperature has reached at least 176ºF (80ºC).
(3) While the engine is running, ensure that normal operating controls are in good working condition
before shutdown and storage. If weekly operation is not possible, contact the nearest engine
manufacturer distributor for instructions.
3) Preparation for Shipment
a) Disconnect the battery negative terminal before shipping.
b) During long shipments, vibration, jolting, etc may loosen the generator set retaining hardware.
CAUTION
When shipping the unit, provide sufficient retaining materials to ensure the generator
set cannot roll out or off the vehicle in which it is being transported.
NOTE: It is suggested that strong banding be used to secure the generator set.