Acceptance
and Installation
Copyright ©ITECH Electronic Co., Ltd.
1
Chapter1 Acceptance and Installation
1.1 Confirm package contents
Open the package and check the articles within package box before operation.
In case of any non-conformity, missing or appearance wearing, please contact
ITECH immediately.
The package box should comprise:
Device name
Quantity Model
Remarks
Electronic load
1
IT8912E
-
Power line
1
IT-E171/IT-E
172/IT-E173/I
T-E174
The User may select different
power lines based on local
outlet specification. For
detailed specifications, refer
to
1.7
Installation of Power
Line.
USB
communication
line
1
-
-
Factory
alignment report
1
-
Test report before delivery.
NOTE
After confirming that package contents are consistent and correct, please appropriately
keep package box and related contents. The package requirements should be met when
the instrument is returned to factory for repair.
IT8912E electrical load has optional fittings for individual sales. Detailed
descriptions of each fitting are as shown below:
Device name
Model
Fitting description
Installation fitting for
mounting instrument
to rack
IT-E151/
IT-E151A
When the user is to install the instrument
to a special rack, use this fitting.
1.2 Instrument Size Introduction
The instrument should be installed at well-ventilated and rational-sized space.
Please select appropriate space for installation based on the electronic load
size.
The detailed size of the electronic load is shown as below.
