Isuzu NPR 2008, Руководство пользователя

Страница: 82 / 192

2-54
NOTICE: Until a certain quantity of PM has accumulated in the DPF
filter, the DPF indicator light (amber) will go off after 3 seconds,
even if you continue to press the DPF switch. In this case, there is
no need to perform DPF regeneration, so regeneration will not start
even if you press the DPF switch.
4. The DPF indicator light (green) will come on with the DPF indicator
light (amber) remaining on, the engine speed automatically
increases, and DPF regeneration starts. Regeneration is normally
completed in about 20 minutes.
5. W h e n t h e D P F i n d i c a t o r l i g h t s ( a m b e r , g r e e n ) g o o f f , t h e
regeneration is completed, and the vehicle can be run normally.
CAUTION: In the event that selectable regeneration is interrupted
due to the vehicle moving, for example, the DPF indicator light
(green) will go off, and the DPF indicator light (amber) will come
on. In this case, promptly stop the vehicle, press the DPF switch
again, and wait until the completion of selectable regeneration. Do
not continue to drive the vehicle while the indicator lights (amber,
green) remain on.
CAUTION: During regeneration, white smoke may be emitted.
Do not perform the regeneration in a poorly ventilated room.
NOTICE:
• The time it takes for the regeneration to complete differs
depending upon the external temperature.
• During DPF regeneration, the exhaust brake valve operates.
Operating noise is emitted while the exhaust brake valve is
operating and also when it is deactivated; this does not mean
that a breakdown has occurred.
• White smoke may sometimes be emitted from the exhaust pipe
for a short period depending on PM combustion during
regeneration; this does not mean that a breakdown has occurred.
• Selectable regeneration is completed more quickly after the
vehicle has stopped driving than when the engine is cold.
• During selectable regeneration, the coolant temperature may
sometimes rise.
55702_Sec02-2_'08 08.2.12 9:46 AM Page 54