Isuzu NPR 2008, Руководство пользователя

Страница: 71 / 192

2-43
Idle Speed Control Knob
SWITCHES AND CONTROLS
ENGINE CONTROL (KEY) SWITCH
The starting circuit, engine alarm circuits (if used) and accessory
circuits are all controlled by the engine control (key) switch. This
switch is located on the right-hand side of the steering column.
R e f e r t o “ S t a r t i n g t h e E n g i n e ” p r e v i o u s l y i n t h i s s e c t i o n f o r
information about the Engine Control Switch.
LIGHTING CONTROL SWITCH
Check operation of all vehicle lights daily. Refer to “Steering Column
Controls” in this section.
IDLE SPEED CONTROL
The idle speed control knob is located to the left of the steering
column, mounted on a panel in the instrument panel. Engine RPM can
be increased by turning the idle speed control knob clockwise. To
return the engine to its normal idle speed, turn the idle speed control
knob counterclockwise.
Refer to “STARTING PROCEDURE” on page 2-7 in this section for
further information on the idle speed control.
CAUTION: Do not use the idle speed control knob while the vehicle
is in motion. This could reduce your ability to stop in an
emergency, possibly resulting in personal injury or death and/or
property damage.
Before the DPF regeneration, be sure to return the idling control
knob all the way to the left. Refer to "Manual regeneration
procedure" and "Selectable regeneration procedure".
55702_Sec02-2_'08 08.2.12 9:46 AM Page 43