Assembly guide for EASY ROOF EVOLUTION L-1
In
fo
rm
at
io
n
et
v
is
u
el
s
n
o
n
c
o
n
tr
ac
tu
el
s.
S
o
u
s
rés
er
ve
d
e
m
o
d
if
ic
at
io
n
s
tec
h
n
iq
u
es
s
an
s
p
réavi
s.
This document is the property of IRFTS. It shall not be reproduced or shared with third parties without IRFTS agreement
Annex n° 6
7. Assembly of the middle glazing stops
a) Position the middle glazing stops and focus of directing it to have the closest drill near to the edge.
b) Screw in place with two CHC M6 x 30 (11) or CHC M6 x 40 (10) screws depending on the thickness of
the PV module (3 screws for 6 bracket assembly)
The position of the modules must comply to the requirements in the instructions page 52
3 mm
Clamping
torque
8.8 Nm
Model “L-1” 60 Cells 6” Portrait
82
Assembly with glazing stops
(Cross section)
8. Assembly of the side glazing stops
PV module
a)
Adjust the height of the side single glazing stop support screws so that they are flush with the top of
the PV module
