IRFTS EASY ROOF EVOLUTION L1, Руководство по установке

Страница: 33 / 110

Assembly guide for EASY ROOF EVOLUTION L-1
www.irfts.com IRFTS
In
fo
rm
at
io
n
et
v
is
u
el
s
n
o
n
c
o
n
tr
ac
tu
el
s.
S
o
u
s
rés
er
ve
d
e
m
o
d
if
ic
at
io
n
s
tec
h
n
iq
u
es
s
an
s
p
réavi
s.
This document is the property of IRFTS. It shall not be reproduced or shared with third parties without IRFTS agreement
Model “L-1” 60 Cells 6” Portrait
Installation of the bottom metal sheet
12.2.4)
The bottom metal sheet must be aligned with the frames on each side of the PV field.
Position all the frames of the first line while proceeding as indicated page 28. Do a marking at each
end on the wood.
Then slide the frames upward slightly.
(view with fictitious frames)
Marking
(view with fictitious frames)
(view with fictitious frames)
Marking
Cut the top batten of the double lath 250mm wider than the marking so that the remaining batten is
on the same level as the reference support batten. If the barge board is too high, cut it again along all
the length of the batten that was removed previously.
250 mm
250 mm
33
PV field positioned at the gutter/eave