IRFTS EASY ROOF EVOLUTION L1, Руководство по установке

Страница: 27 / 110

Assembly guide for EASY ROOF EVOLUTION L-1
www.irfts.com IRFTS
In
fo
rm
at
io
n
et
v
is
u
el
s
n
o
n
c
o
n
tr
ac
tu
el
s.
S
o
u
s
rés
er
ve
d
e
m
o
d
if
ic
at
io
n
s
tec
h
n
iq
u
es
s
an
s
p
réavi
s.
This document is the property of IRFTS. It shall not be reproduced or shared with third parties without IRFTS agreement
Model “L-1” 60 Cells 6” Portrait
12.1.4)
Installation of the bottom flashing
Set up the bottom flashing. Attention not to stick the ends and the higher edge, in order to be
able to flip over the ends.
The overlap on the tiles will be made according to the tiles model.
Make sure that the tiles are covered with 150 mm MINI.
* Reference nomenclature
Make a flip over from 10 to 15 mm on the higher edge of the bottom flashing over all the width of the PV field
Make a flip over from 10 to 15 mm on the
right and left side of the bottom flashing on
all the height
(Left side of PV field )
(Right side of PV field )
Bottom flashing MINI “width” = (2 X 150) + dimension A
reference support
batten (d)
150 mm MINI
Bottom flashing
“width”
27
PV field centered on rake direction
Easy-roof frame