iPecs Lab 104441-01, Руководство пользователя, Страница: 28 / 50

28
SEC
T
IO
N
iPecs™
LAB
/ User Manual
01
02
03
04
05
06
07
08
09
10
COMMAND DESCRIPTION
Clear Errors
Selecting this command and clicking on
Send clears any errors (indicated by the red
LED) on the iPecs Lab sensor.
Clear Zeros
This command clears any relative values
set by the user and enables the iPecs Lab
sensor to output raw voltages.
Toggle Spectrum Analyzer
This command brings up a new window
depicting the Radio frequency spectrum
between 2400 to 2483 MHz.
Zero
Sending this command to the iPecs Lab
sensor has the same effect as pressing the
zero-button on the iPecs Lab sensor.
C
Set Averaging: The sensor is capable of sampling the data at
a high rate of speed. It can sample each of the strain gages
and send the data to the PC at over 1000 samples/sec. If the
sample rate does not need to be that high, the sensor can aver-
age a number of samples together and send out the average.
This can dramatically reduce noise.
The averaging can be set to 1, 2, 4, 8, 16 32, 64, 128, 256, 512
or 1024 samples.
To set the averaging rate, select the averaging rate from the
pull-down menu and click on
Set Averaging .
D
Command /Send: This button is used to control certain functions
of the iPecs Lab sensor remotely (from the PC) by the user.
These functions are available in the pull-down menu:
Set Averaging Table
(Approx. Samples per second)
VALUE 1 2 4 8 16 32 64 128 256 512 1024
SAMPLES 1085 963 791 584 388 229 127 67 34 17 9
High Frequency Walking Low
Software Overview