iPecs Lab 104441-01, Руководство пользователя, Страница: 27 / 50

27
SEC
T
IO
N
iPecs™
LAB
/ User Manual
01
02
03
04
05
06
07
08
09
10
Basic Operations
Turn on the iPecs Lab sensor by pressing and holding the power
button for a couple of seconds until the battery level indicator
LEDs and power LED turn on. At this point, observe the single
green LED on the DCM turn on and stay on. This indicates that the
iPecs Lab DCM is receiving radio data from the iPecs Lab sensor.
Pairing the Sensor and DCM
The sensor and DCM need to be paired to start data acquisition
and display readings. Begin by clicking on the
Connect to iPecs
button just above the grid lines in the iPecs Lab software window.
By clicking the button, the DCM Connection Status window s
appears and the number in Packets Rec (received) box steadily )
increases indicating that the sensor is transmitting to the DCM.
A
Device ( connected ): Lists the hardware details of the serial de-
vices connected to the computer.
B
Zero Button: Indicates that the current reading represents zero
forces and moments. After it is clicked, all future readings will
be relative to the current values.
Software Overview