84
Trap Setup
To enter the interface for configuring the host to which Traps are to be sent, click
Device Management > SNMP >
Trap Setup
as seen below.
To config the host, do as follows:
1. Click
Add
to enter the following screen:
2. Enter an IP address in the
Target Host IP
field. Note that the host IP must be a legal unicast address and should
be on the same IP net segment as the switch, say "192.168.0.77".
3. Enter a UDP port number to which Traps are to be sent in the
Port NO.
field. The default is 162.
4. Enter a custom community name of up to 31 characters, such as "public" in the
Community Name
field. The
community name is used to achieve successful interaction between NMS and SNMP Agent.
5. Trap Version: Select v1, v2c or V3. By default, the switch interacts with NMS using the SNMP v1.
6. Click
OK
.
With above settings applied successfully, NMS on the host can receive Traps sent by the SNMP agent on the
switch.
Содержание G3224P
Страница 1: ......