80
To enable SNMP
Select
Enable
from the
SNMP Status
drop-down list.
You will see the Local Engine ID after enabling SNMP. This field is not configurable.
Specify a
Max Packet Size
value, the default is 1500.
Configure contact info. The default is www.ip-com.com.
Here you can specify device's physical location.
SNMP Version: Select V1, V2c or V3.
Click
Add
to create a community name as seen below:
Note:
You must create a view before you can create a community.
Community Name: Click
Standard
and select
public
or
private
; click
Custom
and enter a community name of up
to 31 characters.
Access Right: Select
Read only
or
Read & Write
.
Click
OK
.
Now you can use the V1, or V2c community name to view or configure settings of nodes in the MIB.
User
Click
Device Management > SNMP > User
to enter the screen below:
Содержание G3224P
Страница 1: ......
