132
5.3.13 Config Port Rate Limit
IP-COM(config)# interface range gigabitethernet 0/1
IP-COM(config-if)# rate-limit input 100
Note:
Set ingress rate limit to 100M on port 1
IP-COM(config-if)# rate-limit output 10
Note:
Set egress rate limit to 10M on port 1
IP-COM(config-if)# no rate-limit input
Note:
Clear ingress rate limit on the port
IP-COM(config-if)# no rate-limit output
Note:
Clear egress rate limit on the port
5.3.14 Config Link Aggregation
Create aggregation group
IP-COM(config)# interface range gigabitethernet 0/1-4
Note:
Set ports 1-4 as link aggregation member ports
IP-COM(config-if)# trunk-group 1 type static
Note:
Set static aggregation group: 1
IP-COM(config-if)# trunk-group 2 type lacp
Note:
Create a LACP static aggregation group: 2
Delete aggregation group
IP-COM(config)# interface range gigabitethernet 0/1-2
IP-COM(config-if)# no trunk-group
Note:
Delete member ports 1-2 from the aggregation group
Config LACP settings
IP-COM(config-if)# lacp priority 65535
Note:
Set LACP port priority to 65535
IP-COM(config-if)# lacp timeout long
Note:
Set timeout long
IP-COM(config-if)# lacp timeout short
Содержание G3224P
Страница 1: ......
