26
Flow Control
With flow control enabled on both the switch and its link partner, the switch, when
encountering congestion, will send flow control frames to notify the link partner of
such; upon receiving such frames, the link partner will temporarily stop sending
packets to the switch, thus avoiding packets being dropped and ensuring a reliable
network. Meanwhile, if a certain port receives Pause frame, it will also stop sending
packets out.
By default, the flow control feature is disabled.
Enable/Disable
Enable/disable selected port(s). A disabled port cannot forward packets.
By default, all ports are enabled.
Isolation
Only in 802.1Q VLAN mode, isolation feature can be set. It can implement isolation
of group members’ intercommunication by adding a port into one isolation group. This
feature helps not only deliver better security also offer flexible networking solutions.
By default, isolation feature is disabled.
Jumbo Frame
Use this option to configure the size of a jumbo frame (1518-9216) that the switch is
to receive. The switch continues data processing within the jumbo frame range. The
default jumbo frame size is 1518.
To configure a single port, click the corresponding port on the main screen and a screen for configuring the specific
port will display.
To configure a group of ports as a batch task, click
Config
on the main screen and you will enter the intended
screen.
Содержание G3224P
Страница 1: ......
