142
Note:
BPDU message broadcast and filter will take effect as STP is disabled.
Reset STP system settings
IP-COM(config)# no spanning-tree mode
Note:
Delete current STP version settings and restore it to the default mstp
IP-COM(config)# no spanning-tree max-age
Note:
Delete current max age setting and restore it to the default 20
IP-COM(config)# no spanning-tree hello-time
Note:
Delete current Hello Time setting and restore it to the default 2
IP-COM(config)# no spanning-tree forward-time
Note:
Delete current forward delay setting and restore it to the default 15
IP-COM(config)# no spanning-tree mstp max-hops
Note:
Delete max hop setting and restore it to the default 20
IP-COM(config)# no spanning-tree mstp 0 priority
Note:
Delete instance bridge priority setting and restore it to the default 30768
Configure MSTP domain
IP-COM(config)# spanning-tree mstp configuration
Note:
Enter MSTP configuration interface
IP-COM(config-mst)# name 2222
Note:
Configure domain name
IP-COM(config-mst)# revision 52
Note:
Configure revision level
IP-COM(config-mst)# instance 2 vlan 52
Note:
Configure vlan mapping and enable this instance
IP-COM(config-mst)# no name
Note:
Delete domain name settings and restore to factory default settings (MAC address of the Switch)
IP-COM(config-mst)# revision 52
Note:
Delete revision level settings and restore it to the default 0.
Содержание G3224P
Страница 1: ......
