Invacare® Pronto™ M41 Series
•
13 mm wrench (2x)
•
Oblong wooden block (at least 14 x 14 x 30 cm)
•
6 mm Allen key
•
13 mm wrench
•
Oblong wooden block (at least 14 x 14 x 30 cm)
•
6 mm Allen key
•
13 mm wrench
•
Oblong wooden block (at least 14 x 14 x 30 cm)
•
5 mm Allen key
•
Oblong wooden block (at least 14 x 14 x 30 cm)
•
5 mm Allen key
•
13 mm wrench
•
Oblong wooden block (at least 14 x 14 x 30 cm)
Removing Wheel
1.
Place wooden block underneath mobility device and prop up mobility device.
2.
Remove end-caps from bolt and nut (if applicable).
3.
Fig. 6-12
Remove nut from bolt
A
.
4.
Remove bolt and wheel from fork.
Installing Wheel
1.
Install parts in reverse order.
2.
When installing wheel, pay attention to correct direction of rotation.
3.
Tighten nut to prescribed torque. See
6.9.4 Specific Tightening Torques, page 30
.
Replacing Castor Wheel (Aviva RX and Storm
4
Max)
•
5 mm Allen key (up to August 2016)
•
TX40 Torx key (starting August 2016)
•
Oblong wooden block (at least 14 x 14 x 30 cm)
34
1568396-C
