7.5 Replacing Armrest Assembly (Captain's Seat)
•
12 mm box wrench
•
13 mm box wrench
1.
If necessary, remove joystick.
2.
Remove mounting screw (6), three washers (5), and
locknut (4) that secures existing armrest (1) to armrest
post (3).
3.
Discard old/existing armrest.
4.
Position new armrest on armrest post and secure with
mounting screw (6), three washers (5), and locknut (4).
5.
If necessary, install joystick.
6.
Repeat first four steps for opposite armrest, if
necessary.
Fig. 7-5
7.6 Replacing Postural Belt (Standard Seat)
A nut is fixed between the two washers (2) and (4) as a spacer so that the belt mounting can rotate freely.
•
5 mm Allen key
•
13 mm socket wrench
1.
Remove plastic cap (5).
2.
Loosen bolt (3) and associated nut
(covered by plastic cap).
3.
Remove nut.
4.
Remove bolt including postural
belt and flat washers (2) and (4).
5.
Remove flat washers (4).
6.
Replace posture belt (1).
7.
Install parts in reverse order.
Fig. 7-6
Fig. 7-7
7.7 Replacing Postural Belt (Captain's Seat)
WARNING!
Always wear your posture belt. The posture belt is a positioning belt only. It is not designed for use as a
safety device withstanding high stress loads such as auto or aircraft safety belts. If signs of wear appear, belt
must be replaced immediately.
•
3/16 inch Allen key
1568396-C
47
