Invacare® Pronto™ M41 Series
6.10 Shrouds
6.10.1 Replacing Top Shroud
•
Slotted screwdriver
•
Phillips screwdriver
Removing Top Shroud
1.
2.
Disconnect joystick.
3.
Remove seat assembly, refer to
.
4.
Remove two screws (2) that secure top shroud (5) to
frame (3).
5.
Remove two screws (2) that secure both top shroud (5)
and front shroud (1) to frame (3).
6.
Remove top shroud (5) by pulling top shroud forward
then up to clear motor release levers and seat post.
Fig. 6-15
Installing Top Shroud
1.
Pull joystick cable through center hole in top shroud
(5).
2.
Place top shroud (5) on base frame.
Pull cover forward to clear motor release levers.
3.
Install two screws (2) that secure top shroud (5) to
frame (3). Do not overtighten.
4.
Attach front shrouds (1) to top shroud (5).
5.
Install two screws (2) that secure both top shroud (5)
and front shroud (1) to frame (3). Do not overtighten.
6.
Install seat assembly. See
.
7.
Connect joystick.
6.10.2 Replacing Front Shroud
•
Slotted screwdriver
•
Phillips screwdriver
Removing Front Shroud
1.
Remove two screws (2) that secure both top shroud (5)
and front shroud (1) to frame (3).
2.
Remove front shroud (1) from frame (3).
Fig. 6-16
36
1568396-C