Section 2:
Configuration
Revision 1.0a
31
© 2006 Intuicom, Inc.
Radio ID (Menu Option D)
Option (D) allows a transceiver to be designated with an arbitrary, user selectable, 4 digit
number which identifies the transceiver in the diagnostics mode.
2.4.7 TDMA Menu
The TDMA Menu contains parameters for controlling operation in TDMA mode. Refer
to the
Intuicom TDMA Design and Configuration Guide
or contact Intuicom for more
information about TDMA.
2.4.8 Chg Password
Setting a password allows the Wireless Data Transceiver’s configuration to be locked. It
is recommended that a password
never
be set.
CAUTION:
If the password is forgotten, the unit will have to be physically returned to
Intuicom for the password to be reset. It is recommended that a password
never
be set.
To enable the Password feature choose (8) from the menu. You will be prompted with
New PW? (<esc> to exit)
To back out of the process and not enable the password, hit escape. To set a password,
type in
4 characters
. At any point in the process you can cancel by hitting the escape
key. Once the 4 characters have been entered you will be prompted with:
<Enter> to accept,<esc> to quit
At this point if you wish to accept the password entered and enable the feature, press the
enter key. The password that you have chosen is displayed on the line above (please note
that the password is case sensitive). To quit the process and not enable the password
press ESC.
Changing a Password
Once the password feature has been enabled it is possible to change to a new password.
To enter a new password select (8) from the Main Menu. You will be prompted with
“Enter Security Code” to enter the current password. Once the password has been
entered correctly (it
is
case sensitive) you will be prompted to enter the new password.
At any point this process may be cancelled by pressing escape.