Section 2:
Configuration
Revision 1.0a
14
© 2006 Intuicom, Inc.
2.4 Radio Configuration (Wireless Data Transceiver)
Main Menu Option (
3
) allows the user to configure the internal wireless data transceiver.
Configuration of the Wireless Data Transceiver is key to the Navigator IIm’s operation and
to what “role” it plays in a wireless network.
Because the wireless data transceiver core is uniform across Intuicom products, the
Intuicom
Communicator II User Guide
is recommended for supplementary and supporting detail for
the configuration of the embedded wireless transceiver.
Figure 2-10: Wireless Data Transceiver Configuration Menu
2.4.1 Operation Mode
The appropriate operation mode must be selected for a Navigator IIm based on its chosen
role in the wireless network (Master, Slave, Repeater). The most common role for a
Navigator IIm is to operate as a slave with other Navigator IIms, thus the appropriate
operation mode is “Point to Multipoint Slave”. If the Navigator IIm is to operate as the
master in a network, “Point to Multipoint Master” is the appropriate mode. For
Navigator IIm units operating as repeaters or slave/repeaters, choose “Point to Multipoint
Repeater”. For TDMA configuration and operation, refer to the
Intuicom TDMA Design
and Configuration Guide
.