Section 2:
Configuration
Revision 1.0a
39
© 2006 Intuicom, Inc.
2.5.5 Administration
Figure 2-21: Navigator Configuration - Administration
Upgrade NAVIGATOR Firmware
Select this option when performing an upgrade to the Navigator IIm core firmware.
Upgrade RF(RADIO) Firmware
Select this option when performing an upgrade to the embedded wireless transceiver’s
firmware.
Reset unit to Defaults
This option will reset all Navigator, GPS and embedded wireless transceiver
configuration parameters back to factory defaults.
Set up RF Section Via Diag
This option provides for “back door” configuration access to the embedded wireless
transceiver. The feature should not normally be necessary, but if the embedded wireless
transceiver’s SETUP PORT parameter (
Section 2.4.2
) is set to 2 for DIAG ONLY –
using this feature is the only way to access the transceiver’s configuration menu.