intrepid Intrepid 6140 Director, Инструкция по установке и обслуживанию

Страница: 106 / 430

2
2-64
Intrepid® 6140 Director Installation and Service Manual
Installation Tasks
Figure 2-33
New Threshold Alert Dialog Box (Screen 2)
6. Type a value from 1 through 100 in the % utilization field. When
throughput reaches the specified percentage of port capacity, a
threshold alert occurs.
7. Enter the cumulative minutes for which the % utilization should
exist during the notification interval before an alert is generated.
Select the At any time radio button to specify that an alert occur
when the % utilization is reached. The valid range is 1 to the
interval set in the following step.
8. Enter the interval (in minutes) during which throughput is
measured and threshold notifications can occur. The valid range
is 5 through 70560 minutes.
9. Click Next. The New Threshold Alert dialog box (screen 3) displays
( Figure 2-34 ).
10. Select the Port Type or Port List radio button.
• Select the Port Type radio button, then the E_Ports, F_Ports, or
FL_Ports radio button to cause an alert to generate for
configured ports.
• Select Port List to configure individual ports by clicking the
check box adjacent to each port number. Select Set All Ports to
place a check mark adjacent to all port numbers.
11. Click Next. The New Threshold Alert dialog box (screen4) displays
a summary of the alert configuration. To make changes, move
back and forth through the configuration screens by selecting
Previous or Next.