intrepid Intrepid 6140 Director, Инструкция по установке и обслуживанию

Страница: 39 / 430

1
Tools and Test Equipment
1-17
General Information
Figure 1-11
Fiber-Optic Protective Plug
• Null modem cable - An asynchronous RS-232 null modem cable
( Figure 1-12 ) is required to configure director network addresses
and acquire event log information through the maintenance port.
The cable has nine conductors and DB-9 male and female
connectors.
Figure 1-12 Null Modem Cable
Tools Supplied by
Service Personnel The following tools are expected to be supplied by service personnel
performing director installation or maintenance actions. Use of the
tools may be required to perform one or more test, service, or
verification tasks.
• Scissors or pocket knife - A sharp cutting edge (scissors or
knife blade) may be required to cut the protective strapping when
unpacking replacement FRUs.
• Standard flat-tip and cross-tip (Phillips) screwdrivers -
Screwdrivers are required to remove, replace, adjust or tighten
various FRUs, chassis, or cabinet components.
• T10 Torts
®
tool - The tool is required to rack-mount the director
or to remove, replace, adjust or tighten various chassis or cabinet
components.
•
Electrostatic discharge (ESD) grounding cable with attached
wrist strap -
Use of the ESD wrist strap is required when working
in and around the director card cage.