intrepid Intrepid 6140 Director Скачать руководство пользователя страница 188

Страница: 188 / 430

4-8

Intrepid® 6140 Director Installation and Service Manual

Repair Information

•

Direction -

The Fibre Channel frame direction (In or Out).

•

Frame Header -

24-byte frame header (hexadecimal).

•

Length -

The size of frame payload in bytes.

•

Payload -

First 32 bytes of frame payload (hexadecimal).

•

SOF -

The start of frame character (hexadecimal).

•

EOF -

The end of frame character (hexadecimal).

NOTE:

Identical entries are recorded in the wrapping and non-wrapping

logs. When the non-wrapping log fills, old records are overwritten. The
wrapping log preserves all records.

Switch Fabric Log

The Switch Fabric Log records the time and nature of changes made to
a multiswitch fabric that affect this product.

The log describes:

•

Date/Time -

The date and time the change occurred. Timing

granularity is provided to one hundredth of a second.

•

Description -

The description of the zoning or fabric change.

•

Event Data -

Supplementary event data that provides additional

information that varies according to the even logged.

•

Ports (RSCN only) -

The list of product ports affected by

registered state change notifications (RSCNs) related to the event.

NOTE:

Identical entries are recorded in the wrapping and non-wrapping

logs. When the non-wrapping log fills, old records are overwritten. The
wrapping log preserves all records.

EFCM Basic Edition Logs

Select the desired log from the Logs menu at any time.

Event Log

The Event Log displays events or errors. Entries reflect the status of
the interface and managed director.

The log describes:

•

Date/Time -

The date and time the event occurred.

Содержание Intrepid 6140 Director















































































































































































































































































































































































































































Результаты поиска

Содержание Intrepid 6140 Director

Отзывы:

Бренды по названию

Популярные бренды

intrepid Intrepid 6140 Director, Инструкция по установке и обслуживанию

Результаты поиска

Содержание Intrepid 6140 Director

Отзывы:

Бренды по названию

Популярные бренды