Intermec EasyLan AW02, Руководство пользователя

Страница: 113 / 126

Appendix A — Console Commands
EasyLAN Wireless User’s Manual 101
NetWare Console Commands (continued)
Command Description
set netw se name status
Enables or disables the specified file server. Where
name is the file server and status is
en
for enabled or
dis
for disabled. By default, none are enabled or
disabled, because no Netware servers are configured.
set servi servicename
con string
Sets NDS context. Where servicename is the service
you are modifying and string is the NDS context.
The default is NULL.
set servi servicename
netw status
Enables or disables NetWare jobs. Where
servicename is the service you are modifying and
status is
en
for enabled or
dis
for disabled. The
default is enabled for service PR1_P1 and disabled
for all others.
set servi servicename
tree string
Sets NDS tree. Where servicename is the service you
are modifying and string is the NDS tree. The
default is NULL.
sh netw
Shows the NetWare parameters.
NetBIOS and NetBEUI Console Commands
These commands let you configure and display NetBIOS and NetBEUI
parameters.
NetBIOS and NetBEUI Console Commands
Command Description
set netbeui status
Enables or disables communication over the
NetBEUI protocol. Where
status is
en
for enabled or
dis
for disabled. The default is enabled.
set netbios dom string
Sets the name of the domain that contains the PCs
that will print to this printer. Where
string is any
string of alphanumeric ASCII characters. The
default is NULL.
set netbios me method
Sets the method of getting the WINS server IP
addresses. Where
method is
auto
or
static
. The
default is
auto
.
set netbios pr n . n . n . n
Sets the IP address of the primary WINS server.
Where
n is a number from 0 to 255. The default is
0.0.0.0.
set netbios se n . n . n . n
Sets the IP address of the optional secondary WINS
server. Where
n is a number from 0 to 255. The
default is 0.0.0.0.
set servi servicename
netb status
Enables or disables NetBIOS jobs on the specified
service. Where
servicename is the service you are
modifying and status is
en
for enabled or
dis
for
disabled. The default is enabled for service
BINARY_P1 and disabled for all others.
sh netbeui
Shows the NetBEUI and the NetBIOS parameters.