Intermec EasyLan AW02, Руководство пользователя

Страница: 104 / 126

Appendix A — Console Commands
92 EasyLAN Wireless User’s Manual
General Console Commands (continued)
Command Description
set serve na name
Sets the name of the node. The default is
INTERMEC_
xxxxxx , where xxxxxx are the last 6 hex
digits of the MAC address.
set servi servicename
bot nn
Sets the service BOT string to nn . Where servicename
is the name of the service you are modifying and nn
is the BOT string. The default is 1.
set servi servicename
eot nn
Sets the service EOT string to nn . Where servicename
is the name of the service you are modifying and nn
is the EOT string. The default is 1.
set servi servicename
fil nn
Sets the service filter to nn . Where servicename is the
name of the service you are modifying and nn is the
service filter. The default is 1 for service PR5_P1, 4
for INTERMEC_1_AT_P1, 0 for all others.
set servi servicename
fms matchnumber
Sets the service with the specified match string
number. Where
servicename is the name of the
service you are modifying and matchnumber is the
match string number. The default is 0.
set servi servicename
frs replacenumber
Sets the service with the specified replacement string
number. Where
servicename is the name of the
service you are modifying and replacenumber is the
replacement string number. The default is 0.
set servi servicename
na newname
Changes the service name. Where servicename is the
name of the service you are modifying and newname
is the new name for the service. The default varies by
service.
set servi servicename
po portname
Changes the service port name. Where servicename is
the name of the service you are modifying and
portname is the new name for the service port. The
default is P1.
set servi servicename
pri nn
Sets the service priority. Where servicename is the
name of the service you are modifying and nn is
priority number. The default is 10.
set servi servicename
rec status
Enables or disables Receive Only mode on the
specified service. Where
servicename is the name of
the service and status is
en
for enabled or
dis
for
disabled. The default is disabled.
This option is rarely required, but some host
applications do not operate properly if data is
received back from the printer.
set str string# value
Sets the service string table entry. Strings 1 to 11
cannot be set or changed.
sh fat
Shows the fatal error log.
sh fil
Shows the available filters.
sh free
Shows the memory available.
sh loa
Shows the firmware update parameters.