Intermec EasyLan AW02, Руководство пользователя

Страница: 112 / 126

Appendix A — Console Commands
100 EasyLAN Wireless User’s Manual
Parallel Port Console Commands (continued)
Command
Description
set port p1 psta status
Enables or disables PJL status initialization on the
parallel port. The default is disabled. This parameter
must remain disabled.
set port p1 sojbusy
time
Sets the amount of time (in ms) that the parallel port
waits if the printer is busy when a job starts. The
default is 100 ms.
sh port
Shows information about the parallel port, which
EasyLAN Wireless uses to communicate internally
with the printer.
NetWare Console Commands
These commands let you configure and display NetWare parameters.
NetWare Console Commands
Command Description
cl netw qs server on
service
Removes the QServer server on a service. Where
server is the QServer server and service is the service.
cl netw se server
Removes the specified NetWare file server from
EasyLAN Wireless access list. Where
server is the
NetWare file server.
set netw ad n
Sets the advertising frequency of EasyLAN Wireless.
Where
n is the advertising frequency in seconds. The
default is 60 seconds.
set netw status
Enables or disables the NetWare protocol on
EasyLAN Wireless. Where
status is
en
for enabled or
dis
for disabled. The default is enabled.
set netw fr type
Sets the NetWare frame type. Where type is
802.2
,
802.3
,
eth
for Ethernet II,
au
for auto, or
sna
for SNAP. The default is
auto
.
set netw np pserver n
on service
Set NPrinter mode on the specified service. Where
pserver is the NetWare print server, n is the NPrinter
mode, and service is the service you are modifying.
set netw pa password
Sets the EasyLAN Wireless login password for the
file server. Where
password is the login password.
The default is NULL.
set netw po n
Sets the queue polling time. Where n is the number
of seconds. The default is 4 seconds.
set netw qs fileserver
on service
Sets Queue Server mode on the specified service.
Where
fileserver is the NetWare file server and service
is the service you are modifying.
set netw re
Rescans the file servers for new queues.