Interlogix TruVision NVR 21, Руководство пользователя

Страница: 79 / 171

Chapter 11: Network settings
2. Enter the required settings:
Option Description
1. Working Mode Select from Multi-address, Load Balance, and Net Fault Tolerance. This
option is not available on the TVN 21S.
2. NIC Type Network interface card (NIC) is a device used to connect the recorder to a
network. Select the NIC type used from the drop-down list.
3. Internal NIC IPv4
Address
This is only available for TVN 21S. Enter the internal NIC IPv4 address.
This is the IP address of the recorder's internal network managing only
the PoE port cameras. This is not the LAN IP address.
Default value is 192.168.254.1.
4. Bridge PoE
Camera Network
This is only available for TVN 21S. Check this box to enable the Bridge
PoE Camera Network.
Default value is Enable.
5. Enable DHCP DHCP (Dynamic Host Configuration Protocol) is a protocol for assigning
an IP address dynamically to a device each time it connects to a network.
Check this box if you have a DHCP server running and want your recorder
to automatically obtain an IP address and other network settings from that
server. The DHCP server is typically available in your router.
Default value is Disable.
6. IPv4 Address
Enter the IP address for the recorder. This is the LAN IP address of the
recorder.
Default value is 192.168.1.82.
7. IPv4 Subnet Mask Enter the subnet mask for your network so the recorder will be recognized
within the network.
Default value is 255.255.255.0.
TruVision NVR 21 (SP) User Manual 73