Chapter 14: Device management
Figure 30: Time and date settings window
Table 14: Description of the Time and Date settings window
Option
Description
1.
Time Zone
Select a time zone from the list.
2.
Date Format
Select the date format from the drop-down list. Default format is DD-
MM-YYYY.
3.
Time Format
Select either the 12-hour or 24-hour time format from the list. Default
format is 24-hour format.
4.
Display Day
Check to display the day of the week in the monitor time bar.
Check the box to enable/disable. Default is Disable.
5.
System Date
Enter the system date.
Default date is the current date.
6.
System Time
Enter the system time.
Default time is the current time.
7.
Auto DST Adjustment
Enable to activate DST is automatically. It depends on the time zone
selected.
Default is Disable.
8.
Enable DST
Manually define DST. If this option is selected, the
Auto DST
adjustment
option is disabled.
Default is Disable.
Click the check box to enable or disable daylight savings time (DST).
From
Enter the start date and time for daylight savings.
To
Enter the end date and time for daylight savings.
DST Bias
Set the amount of time to move DST forward from the standard time.
Default is 60 minutes.
TruVision NVR 21 (SP) User Manual
97
Содержание TruVision NVR 21
Страница 1: ...TruVision NVR 21 SP User Manual P N 1072629 EN REV F ISS 07AUG15 ...
Страница 108: ...Chapter 14 Device management Figure 32 RS 232 setup window 102 TruVision NVR 21 SP User Manual ...
Страница 167: ...Appendix E TruVision recorder archiving instructions 4 Click OK TruVision NVR 21 SP User Manual 161 ...
Страница 171: ...Index ...