Interlogix TruVision NVR 21, Руководство пользователя

Страница: 100 / 171

Chapter 13: Alarm and event setup
To setup video loss detection:
1. From the menu toolbar, click Alarm & Event Setup > Video Loss .
2. Select a camera to configure for video loss detection.
3. Check the Enable Video Loss Alarm box to enable the feature.
4. Click the Actions button to enter the Actions window.
5. Set the arming schedule for detecting video loss.
Click the Actions tab and select the schedule of when you want video loss
detection to be enabled. The schedule can be set for all week or any day of the
week with up to 8 time periods per day. Click
Apply to save the settings.
6. Select the alarm response method.
Click the Arming Schedule tab and select how you want the recorder to notify you
of video loss. Select: Full-screen monitoring, enable alarm host, send email, and
trigger alarm host. See page ““Types of system alarm notifications” on page 93 for
the descriptions. Click
Apply to save the settings.
7. Click OK to return to the main window
8. Click Copy to copy these settings to other cameras, if required, and then click
Apply to save the changes.
9. Click Exit to return to live view.
Alarm host setup
If an alarm host is set, the recorder sends a signal to the host when an alarm is
triggered. An example of an alarm host is the TruVision Navigator server. Note that
alarm host applications need to have the TruVision recorder SDK implemented in order
to successfully receive notifications from the recorder.
To set up an alarm host:
1. From the menu toolbar, click Alarm & Event Setup > Alarm Host Setup .
2. Enter Alarm Host IP and Alarm Host Port values.
Alarm host IP represents the IP of the remote PC where the Network Video
Surveillance software installed. The alarm host port value must be the same as
software’s alarm monitor port. Up to three alarm hosts can be set. For each alarm
host, the default port is 5001, 5002, and 5003.
94 TruVision NVR 21 (SP) User Manual