Interlogix advisorone, Руководство пользователя

Страница: 95 / 122

95
Contents Index
AdvisorOne User Manual 1.9.x 466-
4421 • REV A • ISS 14APR2016 ©2016 United Technologies Corporation
Where is the on/off button?
The AdvisorOne panel is designed to remain on at all times. It does not have an on/off
button. It is possible to dim the display using the brightness setting or to use the blank
screen saver from the display settings.
How do I bypass a sensor?
A sensor can be temporarily bypassed and be ignored while the system is armed. This
is useful if a door or window is to remain open when the system is to be armed. Follow
these steps to bypass a sensor for the next arming cycle:
1. Press the Settings icon on the main screen and press CONFIGURATION .
2. Enter a PIN access code.
3. Press DEVICES .
4. Press BYPASS next to Sensors.
5. Press the check mark next to the sensors to be bypassed. Sensors with a blue
check mark will be bypassed.
If a sensor is not displayed, it cannot be bypassed.
6. Press CONTINUE .
The sensor is now bypassed until the next time the system is disarmed. The bypass
process must be repeated again for a future repeat. It is not permanent.
The Shield icon has an exclamation mark. What does it mean and how do I make
it go away?
An exclamation means there is something that requires attention. Press the shield to
view.
Note : At initial startup of the system or soon after startup the yellow exclamation
notification may appear. This is normal (Figure 88).