Intel DB75EN Скачать руководство пользователя

Страница: 68 / 96

Intel Desktop Board DB75EN Technical Product Specification

3.8

Boot Options

In the BIOS Setup program, the user can choose to boot from a hard drive, optical

drive, removable drive, or the network. The default setting is for the optical drive to

be the first boot device, the hard drive second, removable drive third, and the network

fourth.

3.8.1

Optical Drive Boot

Booting from the optical drive is supported in compliance to the El Torito bootable

CD-ROM format specification. Under the Boot menu in the BIOS Setup program, the

optical drive is listed as a boot device. Boot devices are defined in priority order.

Accordingly, if there is not a bootable CD in the optical drive, the system will attempt

to boot from the next defined drive.

3.8.2

Network Boot

The network can be selected as a boot device. This selection allows booting from the

onboard LAN or a network add-in card with a remote boot ROM installed.
Pressing the <F12> key during POST automatically forces booting from the LAN. To

use this key during POST, the User Access Level in the BIOS Setup program's Security

menu must be set to Full.

3.8.3

Booting Without Attached Devices

For use in embedded applications, the BIOS has been designed so that after passing

the POST, the operating system loader is invoked even if the following devices are not

present:

•

Video adapter

•

Keyboard

•

Mouse

3.8.4

Changing the Default Boot Device During POST

Pressing the <F10> key during POST causes a boot device menu to be displayed. This

menu displays the list of available boot devices. Table 41 lists the boot device menu

options.

Table 41. Boot Device Menu Options

Boot Device Menu Function Keys

Description

↑

> or <

↓

Selects a default boot device

<Enter>

Exits the menu, and boots from the selected device

<Esc>

Exits the menu and boots according to the boot priority
defined through BIOS setup

Содержание DB75EN

































































































Результаты поиска

Содержание DB75EN

Отзывы:

Похожие инструкции для DB75EN

Бренды по названию

Популярные бренды

Intel DB75EN, Спецификация

Результаты поиска

Содержание DB75EN

Отзывы:

Похожие инструкции для DB75EN

Бренды по названию

Популярные бренды