Intel DB75EN страница 65 Скачать руководство пользователя

Страница: 65 / 96

Overview of BIOS Features

3.4

System Management BIOS (SMBIOS)

SMBIOS is a Desktop Management Interface (DMI) compliant method for managing

computers in a managed network.
The main component of SMBIOS is the Management Information Format (MIF)

database, which contains information about the computing system and its

components. Using SMBIOS, a system administrator can obtain the system types,

capabilities, operational status, and installation dates for system components. The

MIF database defines the data and provides the method for accessing this information.

The BIOS enables applications such as third-party management software to use

SMBIOS. The BIOS stores and reports the following SMBIOS information:

•

BIOS data, such as the BIOS revision level

•

Fixed-system data, such as peripherals, serial numbers, and asset tags

•

Resource data, such as memory size, cache size, and processor speed

•

Dynamic data, such as event detection and error logging

Non-Plug and Play operating systems require an additional interface for obtaining the

SMBIOS information. The BIOS supports an SMBIOS table interface for such operating

systems. Using this support, an SMBIOS service-level application running on a

non-Plug and Play operating system can obtain the SMBIOS information. Additional

board information can be found in the BIOS under the Additional Information header

under the Main BIOS page.

3.5

Legacy USB Support

Legacy USB support enables USB devices to be used even when the operating

system’s USB drivers are not yet available. Legacy USB support is used to access the

BIOS Setup program, and to install an operating system that supports USB. By

default, Legacy USB support is set to Enabled.
Legacy USB support operates as follows:
1.

When you apply power to the computer, legacy support is disabled.

POST begins.

Legacy USB support is enabled by the BIOS allowing you to use a USB keyboard to

enter and configure the BIOS Setup program and the maintenance menu.

POST completes.

The operating system loads. While the operating system is loading, USB

keyboards and mice are recognized and may be used to configure the operating

system. (Keyboards and mice are not recognized during this period if Legacy USB

support was set to Disabled in the BIOS Setup program.)

After the operating system loads the USB drivers, all legacy and non-legacy USB

devices are recognized by the operating system, and Legacy USB support from the

BIOS is no longer used.

Additional USB legacy feature options can be access by using Intel

Integrator

Toolkit.

Содержание DB75EN

































































































Результаты поиска

Содержание DB75EN

Отзывы:

Похожие инструкции для DB75EN

Бренды по названию

Популярные бренды

Intel DB75EN, Спецификация

Результаты поиска

Содержание DB75EN

Отзывы:

Похожие инструкции для DB75EN

Бренды по названию

Популярные бренды