Intel 2200BG, Руководство пользователя

Страница: 18 / 84

established to acquire an IP address from the AP to allow data transfer.
Refer to the following WEP encryption and authentication settings.
Open Authentication with an incorrect WEP 64 or 128-bit encryption key:
●
A profile with an incorrect WEP encryption key will allow the wireless adapter to
associate with the access point.
●
No data transfer
Open Authentication with no WEP encryption:
●
Allows association to an access point
●
Data transfer is allowed
Shared Authentication:
●
Associated to an AP always allows data transfer.
Problems with installation
Windows does not detect the wireless adapter:
1. Remove and re-install the adapter.
2. Uninstall and reinstall the adapter's drivers.
Before calling Customer Support
Make a note of the following answers before calling customer support:
●
From the General tab, view the adapter's connection details. Check that it is
associated with an access point, and the quality and strength of the signal.
●
From the General page, click the Details button and check what revision of
software and hardware or other LAN software are you running?
●
How many remote units do you have talking to each access point?
●
What channels are you using, and how are they dispersed?
●
How much coverage overlap is there between access points?
●
How high above the floor are the access points mounted?
●
What other electronic equipment is operating in the same band?