Intel 2200BG, Руководство пользователя

Страница: 57 / 84

12. Enter your user name in the User Name field.
13. Select the "
Certificate Issuer " from the list. Select Any Trusted CA as the default.
●
Click the " allow intermediate certificates " checkbox to allow a number of
unspecified certificates to be in the server certificate chain between the
server certificate and the specified CA. If unchecked, then the specified CA
must have directly issued the server certificate.
14. Enter the Server name.
●
If you know the server name enter this name.
●
Select the appropriate option to match the server name exactly or specify the
domain name.
15. Under the "Client certificate" option click the Select button to open a list of installed
certificates.
●
Note about Certificates: The specified identity should match the field "Issued
to" in the certificate and should be registered on the authentication server
(i.e., RADIUS server) that is used by the authenticator. Your certificate must
be "valid" with respect to the authentication server. This requirement
depends on the authentication server and generally means that the
authentication server must know the issuer of your certificate as a Certificate
Authority. You should be logged in using the same username you used when
the certificate was installed.
16. Select the certificate from the list and click OK . The client certificate information
displays under "Client Certificate".
17. Click Close .
18. Click the Finish button to save the security settings for the profile.
Setting up the Client for WEP and MD5 authentication
To add WEP and MD5 authentication to a new profile:
Note: Before starting, obtain a username and password on the RADIUS server from your
system administrator.
1. From the General page, click the Networks tab.
2. Click the Add button from the Profile List.
3. Enter the profile and network (SSID) name.
4. Select
Infrastructure for the operating mode.
5. Click Next .