Intel 2200BG, Руководство пользователя

Страница: 59 / 84

using 8-63 alphanumeric characters ((0-9, a-z or A-Z), in the pass phrase
field.
●
Use hex Key: Click Use hex Key to enable. Enter up to 64 alphanumeric
characters, 0-9, A-F in the hex key field.
9. Click the 802.1x Enabled checkbox.
10. Set the authentication type to TLS to be used with this connection.
11. Click the Finish button to save the security settings for the profile.
Setting up the Client for WPA using TKIP encryption and TLS authentication
Wi-Fi Protected Access (WPA) mode can be used with TLS, TTLS, or PEAP. This
802.1x authentication protocol using data encryption options; WEP or TKIP. Wi-Fi
Protected Access (WPA) mode binds with 802.1x authentication. The data
encryption key is received from the 802.1x key exchange. To improve data
encryption, Wi-Fi Protected Access utilizes its Temporal Key Integrity Protocol
(TKIP). TKIP provides important data encryption enhancements including a re-
keying method.
1. Obtain and install a client certificate, refer to Setting up the Client for TLS
authentication or consult your system administrator.
2. From the General page, click the Networks tab.
3. Click the Add button.
4. Enter the profile and network (SSID) name.
5. Select
Infrastructure for the operating mode.
6. Click Next .
7. Select WPA for the Network Authentication.
8. Select TKIP as the Data Encryption.
9. Set the authentication type to TLS to be used with this connection.
10. Click the Configure button to open the settings dialog.
11. Enter your user name in the User Name field.
12. Select the "
Certificate Issuer " from the list. Select Any Trusted CA as the default.
●
Click the " allow intermediate certificates " checkbox to allow a number of
unspecified certificates to be in the server certificate chain between the
server certificate and the specified CA. If unchecked, then the specified CA
must have directly issued the server certificate.
13. Enter the Server name.