Intel 2200BG, Руководство пользователя

Страница: 31 / 84

5. Click Ad hoc operating mode.
6. Click Password protect this profile to set a profile password.
7. Click Next .
Security Settings
8. Select either None, WEP for the data encryption.
9. If WEP is selected, select either 64 or 128 -bit for the Encryption Level.
10. Select the key index 1, 2, 3 or 4 .
11. Enter the required pass phrase or hex key .
12. If the Password Protection checkbox was checked on the General settings page,
then
click
Next to display the Password page.
Password Protection Settings
13. Click the Password protect this profile checkbox.
14. Enter a password in the Password field.
15. Reenter the same password in the Confirm New Password field.
16. Click the
Back button to change or verify the settings or click Finish when you
have completed the profile settings and return to the Networks page.
Connect to the Network
17. Changing the default transmit channel from the Adapter tab: Unless the other
computers in the ad hoc network use a different channel from the default channel,
there is no need to change the default channel. If you want to change the default
channel, click the
Adapter tab, and click Configure under Ad Hoc Channel
Selection. Choose the operating band select a channel. Click OK to save the
setting.
18. Select the Networks tab
19. After creating the new profile, click the profile in the Profile List. Profiles using ad
hoc mode are indicated by a computer icon next to the profile name.
20. Click the Connect button to connect to the ad hoc network.
Switching the Radio Off/On