Intel 2200BG Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 84

Intel 2200BG Скачать руководство пользователя страница 14

Installation under Window* XP

Preliminary Notes

The installation instructions in this section are based on the following assumptions:

●

The wireless adapter hardware has already been installed in the computer in
accordance with the computer manufacturer's instructions.

●

The computer has not been powered on since the hardware installation was
completed.

●

No other wireless LAN card is installed in this computer.

To install the driver before installing hardware, use

Start > Run

and browse to the

file

SetupWLD.exe

in the path

PROW2200\WINXP

on the Intel CD. After running

SetupWLD.exe, shut down the computer and install the hardware. When the computer
restarts, the driver will be automatically installed.

Before proceeding, make sure that you are operating Windows XP with

administrative rights. If you log in to Windows XP without administrative rights, you may
run into problems during the installation.

The Intel(R) PROSet utility or the Windows XP wireless configuration feature can be

used to configure wireless network settings. The instructions below include steps for
installing the Intel(R) PROSet utility and for turning off the Windows XP configuration
feature. If you do not turn off the Windows XP feature, you will not be able to use Intel(R)
PROSet to configure wireless network settings. For information on how to use the
Windows XP feature, see your Windows XP documentation.

Driver Installation

To install drivers under Windows* XP, follow these steps:

1. Power up the computer in which the wireless adapter hardware has just been

installed.

«
...
12
13
14
15
16
...
»

Содержание 2200BG





















































































Отзывы:

Нет отзывов