Intel 2200BG, Руководство пользователя

Страница: 58 / 84

6. Select Open (recommended) for the Network Authentication.
7. Select WEP as the Data Encryption.
8. Select either 64 or 128 -bit for the Encryption Level.
9. Select the key index 1, 2, 3 or 4 .
10. Enter the required pass phrase or hex key .
11. Click the 802.1x Enabled checkbox.
12. Select MD5 as the 802.1x Authentication Type.
13. Click Configure to open the MD5 Setting dialog. Enter the user name and
password. Note: The user name and password do not have to be the same as
name and password of your current Windows user login.
14. Click Close to save the settings.
15. If the Password Protection checkbox was checked on the General settings page,
then
click
Next display the Password page and enter a profile password.
16. Click the Finish button to save the profile settings.
Setting up the Client for WPA-PSK using WEP or TKIP authentication
Use Wi-Fi Protected Access - Pre Shared Key (WPA-PSK) mode if there is no
authentication server being used. This mode does not use any 802.1x authentication
protocol, It can be used with the data encryption types:
WEP or TKIP . WPA-PSK
requires configuration of a pre-shared key (PSK). You must enter a pass phrase or 64
hex characters for a Pre-Shared Key of length 256-bits. The data encryption key is
derived from the PSK.
To configure a profile using WPA-PSK:
1. From the General page, click the Networks tab.
2. Click the Add button.
3. Enter the profile and network (SSID) name.
4. Select
Infrastructure for the operating mode.
5. Click Next .
6. Select WPA-PSK for the Network Authentication. You can also select
authentication mode.
7. Select WEP as the Data Encryption.
8. Select either of the following:
●
Use pass phrase: Click Use Pass Phrase to enable. Enter a text phrase