Advanced Operations
En-72
Operating
procedure
(
➔
page 58
)
Volume Setup
■
Volume Display
`
Absolute
:
Displayed range is
Min
,
0.5
to
99.5
,
Max
.
`
Relative (THX)
:
Displayed range is
–
Q
dB
,
–81.5dB
to
+18.0dB
.
With this setting, you can choose how the volume level
is displayed.
The absolute value 82 is equivalent to the relative
value 0 dB.
Note
• If the absolute value is set to 82, “
82.0Ref
” will appear on
the display and the
THX
indicator will flash.
■
Muting Level
`
–
Q
dB
(fully muted),
–50dB
to
–10dB
in 10 dB
steps.
This setting determines how much the output is muted
when the muting function is used (
➔
page 51
).
■
Maximum Volume
`
Off
,
50
to
99
(Absolute display)
`
Off
,
–32dB
to
+17dB
(Relative display)
With this setting, you can limit the maximum volume.
To disable this setting, select “
Off
”.
■
Power On Volume
`
Last
,
Min
,
1
to
99
or
Max
(Absolute display)
`
Last
,
–
Q
dB
,
–81dB
to
+18dB
(Relative display)
With this preference, you can specify the volume
setting to be used each time the AV receiver is turned
on.
To use the same volume level that was used when
the AV receiver was turned off, select “
Last
”.
The “
Power On Volume
” setting cannot be set higher
than the “
Maximum Volume
” setting.
■
Headphone Level
`
–12dB
to
0dB
to
+12dB
With this setting, you can specify the headphone
volume relative to the main volume. This is useful if
there’s a volume difference between your speakers
and your headphones.
OSD Setup
■
On Screen Display
`
On
`
Off
This preference determines whether operation details
are displayed on-screen when an AV receiver
function is adjusted.
Even when “
On
” is selected, operation details may
not be output if the input source is connected to an
HDMI IN
.
■
Language
(North American models)
`
English
,
Deutsch, Français, Español, Italiano,
Nederlands, Svenska,
中文
(Australian models)
`
English
,
Deutsch, Français, Español, Italiano,
Nederlands, Svenska,
Русский
язык
,
中文
This setting determines the language used for the on-
screen menus.
■
Screen Saver
`
3min, 5min, 10min
`
Off
With this setting, you can set the time until the screen
saver activates itself. Once active, the screen saver
will go off and the screen will return to its previous
state if the AV receiver is operated in any way.
12V Trigger A/B/C Setup
Depending on their type, when some components are
turned by using triggers A, B, and C, a large amount
of current may be drawn at once. To prevent this, you
can delay each trigger signal individually. Another
application of trigger delay is to eliminate the “thump”
noise that’s sometimes heard when a source
component is turned on.
You can accomplish this by delaying the trigger signal
for your power amplifier, so that it’s the last
component to be turned on.
■
Delay
`
0sec
,
1sec
,
2sec
,
3sec
:
When “
0sec
” is selected, the trigger signal is
output as soon as the input source is changed.
Note
• By default, “
12V Trigger A Setup
” is set to “
0sec
”, “
12V
Trigger B Setup
” to “
1sec
”, and “
12V Trigger C Setup
” to
“
2sec
”.
• Use a miniplug cable to connect the AV receiver’s
12V
TRIGGER OUT
A
,
B
, or
C
jack to the 12 V trigger input of
a connected component.
■
BD/DVD, CBL/SAT, STB/DVR, GAME1, PC, AUX,
TUNER, TV/CD, PHONO, NET, USB
`
Off
:
No trigger signal is output.
A 12-volt trigger signal is output when the connected
component is selected as the source for:
`
Main
,
Zone 2
,
Main/Zone 2
,
Zone 3
,
Main/Zone
3
,
Zone 2/Zone 3
,
Main/Zone 2/Zone 3
Note
• By default, all input sources on the “
12V Trigger A Setup
”
menu are set to “
Main
”, those on “
12V Trigger B Setup
”
are set to “
Main/Zone 2/Zone 3
”, and those on “
12V
Trigger C Setup
” are set to “
Zone 2
”.
6. Miscellaneous
Содержание DTR-50.5
Страница 1: ...AV Receiver DTR 50 5 Instruction Manual...
