Integra DTR-50.5, Инструкция по эксплуатации

Страница: 90 / 108

Controlling Other Components
En-90
You can program the remote controller’s Activities to
perform a sequence of remote control actions.
Example:
To play a CD you typically need to perform the
following actions:
1. Press
Receiver to select the Receiver remote
controller mode.
2. Press 8 Receiver to turn on the AV receiver.
3. Press TV/CD to select the TV/CD input source.
4. Press 1 to start playback on the CD player.
You can program Activities so that all four actions
are performed with just one button press.
Making Macros
Each Activities can store one macro, and each
macro can contain up to 32 commands.
Note
• Mode cannot be operated during the macro-making
process.
• Once you assign new macro commands, the previously
registered macro will no longer work. If you wish to retrieve
it, you will have to reassign the commands with the macro-
making.
Running Macros
Deleting Macros
Note
• When Normal macros are deleted, Activities are restored
to their default settings, namely the Easy macro commands
(
➔
page 52 ).
• When using Normal macros, Easy macros cannot be used,
which includes changing the source components.
Using Normal Macros
1
While holding down Receiver, press and hold
down My Movie, My TV, or My Music until
My Movie, My TV, or My Music lights (about 3
seconds).
2 Press the buttons whose actions you want to
program into the macro in the order you want
them performed.
For the CD example above, you would press the
following buttons:
8 Receiver , TV/CD , 1 .
Receiver
My Movie,
My TV,
My Music
All Off
3
When you’ve finished, press Activities again.
Activities
button flashes twice.
If you enter 32 commands, the process will finish
automatically.
1
Press My Movie, My TV, or My Music.
The commands in the macro are transmitted in
the order in which they were programmed. Keep
the remote controller pointed at the AV receiver
until all of the commands have been transmitted.
Macros can be run at any time, regardless of the
current remote controller mode.
1
While holding down Home, press and hold
down All Off until All Off lights (about 3
seconds).
2 Press All Off again.
All Off
flashes twice.