Integra DTR-40.4, Инструкция по эксплуатации

Страница: 53 / 104

Advanced Operations
En-53
■
BD/DVD, CBL/SAT, STB/DVR, GAME, PC, TV/CD,
PHONO
`
HDMI1 , HDMI2 , HDMI3 , HDMI4 , HDMI5 ,
HDMI6 , HDMI7 :
Select the input to which the component has been
connected.
`
- - - - - :
Output composite video and component video
sources from the HDMI output. The video signal
coming from the HDMI output depends on the
assignments of “
Component Video Input ” and
“ Composite Video Input ”.
*1 If you connect your personal computer to PC IN (Analog
RGB), you must assign “ - - - - - ” to the “ PC ” input selector.
Each HDMI input cannot be assigned to two input
selectors or more. When
HDMI1 - HDMI7 have already
been assigned, you must first set any unused input
selectors to “
- - - - - ” or you will be unable to assign
HDMI1 - HDMI7 to other input selectors.
Note
• If no video component is connected to the HDMI output (even if
the HDMI input is assigned), the AV receiver selects the video
source based on the setting of “
Component Video Input ” and
“ Composite Video Input ”.
• When an HDMI IN is assigned to an input selector as explained
here, the same HDMI IN will be set as a priority in the “ Digital
Audio Input ”. In this case, if you want to use the coaxial or
optical audio input, make the appropriate selection in the “ Audio
Selector ” setting (
➔
page 63 ).
• Do not assign an HDMI IN to the TV/CD selector while “ HDMI
Control(RIHD) ” is set to “ On ” (
➔
page 66 ), otherwise
appropriate CEC (Consumer Electronics Control) operation will
not be guaranteed.
• If you assign “ - - - - - ” to an input selector that is currently
selected in “ HDMI Through ” (
➔
page 66 ), the “ HDMI
Through ” setting will be automatically switched to “ Off ”.
• “ AUX ” is used only for input from the front panel.
Component Video Input
If you connect a video component to a component video
input, you must assign that input to an input selector. For
example, if you connect your Blu-ray Disc/DVD player to
COMPONENT VIDEO IN 2
, you must assign “ IN2 ” to
the “ BD/DVD ” input selector.
Here are the default assignments.
■
BD/DVD, CBL/SAT, STB/DVR, GAME, PC, AUX,
TV/CD, PHONO
`
IN1 , IN2 :
Select the input to which the component has been
connected.
`
- - - - - :
Output composite video sources from the HDMI
output. The upconverted output from HDMI depends
on the assignment of “
Composite Video Input ”.
Composite Video Input
If you connect a component to a composite video input,
you must assign that input to an input selector.
If you switch the input to “
TV/CD ” with its default
assignment, the audio of “ TV/CD ” is output while the
video of the previously-selected source is displayed.
Here are the default assignments.
■
BD/DVD , CBL/SAT , STB/DVR, GAME , TV/CD ,
PHONO
`
IN1 , IN2 , IN3 , IN4 :
Select the input to which the component has been
connected.
`
- - - - - :
The composite video is not input.
Note
• “ AUX ” is used only for input from the front panel.
• “ PC ” is used only for input from
PC IN
.
• Using these inputs as audio-exclusive allows you to enjoy audio
and video from separate inputs. Refer to “Playing Audio and
Video from Separate Sources” for details (
➔
page 33 ).
Input selector Default assignment
BD/DVD IN1
CBL/SAT IN2
STB/DVR - - - - -
GAME - - - - -
PC - - - - -
AUX - - - - -
TV/CD - - - - -
PHONO - - - - -
Input selector Default assignment
BD/DVD IN1
CBL/SAT IN2
STB/DVR IN3
GAME IN4
PC PC IN (Fixed)
AUX FRONT (Fixed)
TV/CD - - - - -
PHONO - - - - -