background image

Appendix

En-100

License and Trademark 
Information

“x.v.Color” is a trademark of Sony Corporation.

Manufactured under license under U.S. Patent Nos: 5,956,674; 
5,974,380; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 
7,392,195; 7,272,567 & other U.S. and worldwide patents issued 
& pending. DTS-HD, the Symbol, & DTS-HD and the Symbol 
together are registered trademarks & DTS-HD Master Audio is a 
trademark of DTS, Inc. Product includes software. © DTS, Inc. 
All Rights Reserved.

Manufactured under license from Dolby Laboratories. Dolby, 
Pro Logic, Surround EX and the double-D symbol are 
trademarks of Dolby Laboratories.

Music Optimizer™ is a trademark of Onkyo Corporation. 

“HDMI, the HDMI Logo, and High-Definition Multimedia 
Interface are trademarks or registered trademarks of 
HDMI Licensing LLC in the United States and other countries.”

InstaPrevue and the InstaPrevue logo are trademarks or 
registered trademarks of Silicon Image, Inc. in the United States 
and other countries.

THX and the THX logo are trademarks of THX Ltd. which may 
be registered in some jurisdictions. All rights reserved. 

iPhone, iPod, iPod classic, iPod nano, iPod shuffle, and 
iPod touch are trademarks of Apple Inc., registered in the U.S. 
and other countries.
“Made for iPod” and “Made for iPhone” mean that an electronic 
accessory has been designed to connect specifically to iPod or 
iPhone, respectively, and has been certified by the developer to 
meet Apple performance standards. Apple is not responsible for 
the operation of this device or its compliance with safety and 
regulatory standards.
Please note that the use of this accessory with iPod or iPhone 
may affect wireless performance.

Apple TV is a trademark of Apple Inc., registered in the U.S. and 
other countries.

THX Select2 Plus

Before any home theater component can be THX Select2 
Plus certified, it must pass a rigorous series of quality and 
performance tests. Only then can a product feature the 
THX Select2 Plus logo, which is your guarantee that the 
Home Theater products you purchase will give you 
superb performance for many years to come. THX 
Select2 Plus requirements define hundreds of parameters, 
including power amplifier performance, and pre-
amplifier performance and operation for both digital and 
analog domains. THX Select2 Plus receivers also feature 
proprietary THX technologies (e.g., THX Mode) which 
accurately translate movie soundtracks for home theater 
playback.

 

 

Manufactured under license from Audyssey Laboratories™, Inc. 
U.S. and foreign patents pending. Audyssey 2EQ

®

Audyssey Dynamic EQ

®

, Audyssey Dynamic Volume

®

 and 

Audyssey DSX

®

 are registered trademarks of 

Audyssey Laboratories, Inc.

“DLNA

®

, the DLNA Logo and DLNA CERTIFIED™ are 

trademarks, service marks, or certification marks of the Digital 
Living Network Alliance.”

Windows and the Windows logo are trademarks of the Microsoft 
group of companies.

Qdeo and QuietVideo are trademarks of Marvell or its affiliates.

“Xantech” is a registered trademark of Xantech Corporation. 

“Niles” is a registered trademark of Niles Audio Corporation. 

Re-Equalization and the “Re-EQ” logo are trademarks of 
THX Ltd. 

“MHL, the MHL Logo, and Mobile High-Definition Link are 
trademark or registered trademarks of MHL LLC in the United 
States and other counties.”

Содержание DTR-40.4









































































































Отзывы: