Integra DTR-40.4, Инструкция по эксплуатации

Страница: 64 / 104

Advanced Operations
En-64
Main Menu Listening Mode Preset
You can assign a default listening mode to each input
source that will be selected automatically when you select
each input source. For example, you can set the default
listening mode to be used with Dolby Digital input signals.
You can select other listening modes during playback, but
the mode specified here will be resumed once the AV
receiver has been set to standby.
■
Analog/PCM/Digital
With this setting, you can specify the listening mode
used when an analog (CD, TV, LD, VHS, MD, turntable,
radio, cassette, cable, satellite, etc.) or PCM digital (CD,
DVD, etc.) audio signal is played.
■
Mono/Multiplex Source
With this setting, you can specify the listening mode
used when a mono digital audio signal is played (DVD,
etc.).
■
2ch Source
With this setting, you can specify the listening mode
used when 2-channel (2/0) stereo digital sources, such as
Dolby Digital or DTS, are played.
■
Dolby D/Dolby D Plus/TrueHD
With this setting, you can specify the listening mode
used when Dolby Digital or Dolby Digital Plus format
digital audio signals are played (DVD, etc.). Specifies
the default listening mode for Dolby TrueHD sources,
such as Blu-ray or HD DVD (input via HDMI).
■
DTS/DTS-ES/DTS-HD
With this setting, you can specify the listening mode
used when DTS or DTS-HD High Resolution format
digital audio signals are played (DVD, LD, CD, etc.).
Specifies the default listening mode for DTS-HD Master
Audio sources, such as Blu-ray or HD DVD (input via
HDMI).
■
Other Multich Source
Specifies the default listening mode for multichannel
PCM sources from
HDMI IN such as DVD-Audio, and
DSD multichannel sources such as Super Audio CD.
Listening Mode Preset
1
Use
q
/
w
to select the input source that you want to
set, and then press Enter .
The following menu appears.
1 2 3 4 5
“ Setup ”
Default listening mode for analog and PCM sources.
Analog/PCM
Mono/Multiplex Source
2ch Source
Dolby D/Dolby D Plus/TrueHD
DTS/DTS-ES/DTS-HD
Other Multich Source
5-1. Listening Mode Preset
BD/DVD
All Ch Stereo e r
Full Mono
PLllx Movie
Straight Decode
Straight Decode
Straight Decode
2
Use
q
/
w
to select the signal format that you want to
set, and then use e / r to select a listening mode.
Only listening modes that can be used with each input
signal format can be selected (
➔
pages 37 to 43 ) .
The “ Last Valid ” option means that the listening
mode selected last will be used.
The “
Straight Decode ” option means that straight
decoding listening mode (Dolby Digital, DTS, etc.) is
selected.
Note
• For the “ TUNER ” input selector, only “ Analog ” will be
available.
• For the “ NET ” or “USB ” input selector, only “ Digital ”
will be available.